Description Of Operation - EmerCom Technologies EMC-60 User Manual

EMC-60 User Guide

3 Description of Operation

In the event of an entrapment or other emergency, an elevator occupant may press the
"phone" button causing the EMC-60 to automatically call the primary phone number.
The "PHONE" LED will illuminate immediately and begin flashing as soon as two-way
voice communication with an authorized person is established.
If the call is not acknowledged within a reasonable time, the phone will automatically
hang up and dial the second phone number, then the third number. If the phone line is
busy, the phone will notify the caller that the system is in use and will redial
automatically every 30 seconds.
The EMC-60 will automatically answer incoming calls, even if connected in parallel with
other EC-Phones, prompting the caller to select which of the phones to begin two-way
communication.
The phone may be easily programmed from the keypad or remotely as described in the
following sections.
- 8 -