System Parameters - Roland AX-Edge Parameter Manual

How the AX-Edge Is Organized
Overview of the AX-Edge
AX-Edge
Program
Part 4
Part 3
Part 2
Part 1
Tone
Partial 1–4
Arpeggio
Vocoder part
Carrier
(tone)
Partial 1–4
MIC INPUT
Controller Section
The controller section is what you use for performing.
When you press or release the keyboard or press the modulation
lever, the controller section sends performance data to the sound
generator section.
The controller section of the AX-Edge consists of the keyboard, the
MODULATION BAR, the RIBBON
buttons and knobs.
Sound Generator Section
The sound generator section creates the sound.
It receives performance data sent from the controller section, and
produces sound.
Program
On the AX-Edge, "programs"
sounds.
A program consists of four parts and a vocoder part, and also
contains arpeggio and effect settings for that program.
Tone
You can select one tone (sound) for each part.
A tone consists of four elements of sound (partials), and you can
specify a multi-effect (MFX) for each tone.
You can also edit tones by using an editor app (AX-Edge Editor) on
your smartphone.
Keyboard
Sound Generator Section
MFX
Vocoder
MFX
Effect
CONTROLLER, and the panel
are the units by which you switch
Controller Section
Button/Knob Modulation Bar
LEVEL
EQ
LEVEL
EQ
Effect
The AX-Edge is equipped with a multi-effect for each tone (MFX), a
multi-effect that can be specified for each program (IFX), and reverb,
chorus/delay, compressor, and EQ effects that are applied to the final
output (system effects).
Reverb and chorus/delay can also be specified and selected for each
program.
System
System memory contains system parameter settings that specify
how the AX-Edge is to operate.
&

"System Parameters"

(p. 35)
5
Ribbon Controller
System Effect
Reverb
IFX
Chorus/Delay
Master Comp/EQ
OUTPUT
System