Phaser; Step Phaser; Multi Stage Phsr; Infinite Phaser - Roland AX-Edge Parameter Manual

MFX/IFX Parameters

14 STEP PHASER

The phaser effect will be varied gradually.
L in
Step Phaser Step Phaser
R in
Step Phaser Step Phaser
Parameter Value
4-STAGE, 8-STAGE,
Mode
12-STAGE
Manual 0–127
Rate Sync
OFF, ON
(Rate (sync switch))
Rate Hz
0.05–10.00 [Hz]
(Rate (Hz))
Note
Rate Note
&
(Rate (note)) "Note" (p. 72)
Depth 0–127
Polarity INVERSE, SYNCHRO
Resonance 0–127
Feedback
-98–+98 [%]
(Cross Feedback)
S Rate Sync
(Step
OFF, ON
Rate (sync switch))
S RateHz
0.10–20.00 [Hz]
(Step Rate (Hz))
Note
S RateNote
&
(Step Rate (note)) "Note" (p. 72)
Mix
0–127
Low Gain
-15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127

15 MULTI STAGE PHSR

Extremely high settings of the phase difference produce a deep
phaser effect.
L in
Multi Multi
Stage Stage

Phaser

Phaser
R in
Parameter Value
4-STAGE, 8-STAGE,
12-STAGE,
Mode 16-STAGE,
20-STAGE,
24-STAGE
Manual 0–127
L out
2-Band EQ 2-Band EQ
Mix
R out
2-Band EQ 2-Band EQ
Mix
Explanation
Number of stages in the phaser
Adjusts the basic frequency from which
the sound will be modulated.
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo" (p. 8)
Frequency of modulation
Depth of modulation
Selects whether the left and right phase
of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be
opposite.
When using a mono source, this spreads
the sound.
SYNCHRO: The left and right phase will
be the same.
Select this when inputting a stereo
source.
Amount of feedback
Adjusts the proportion of the phaser
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo" (p. 8)
Rate of the step-wise change in the
phaser effect
Level of the phase-shifted sound
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Output Level
L out
Pan L
2-Band EQ 2-Band EQ
Pan R
Mix
R out
Explanation
Number of stages in the phaser
Adjusts the basic frequency from which
the sound will be modulated.
Parameter Value
Rate Sync
OFF, ON
(Rate (sync switch))
Rate Hz 0.05–10.00 [Hz]
(Rate (Hz))
Note
Rate Note
&
(Rate (note)) "Note"
Depth
0–127
Resonance 0–127
Mix 0–127
Pan L64–63R
Low Gain -15–+15 [dB]
High Gain
-15–+15 [dB]
Level 0–127

16 INFINITE PHASER

A phaser that continues raising/lowering the frequency at which the
sound is modulated.
L in
Infinite Infinite
Phaser Phaser
R in
Parameter Value
Mode 1, 2, 3, 4
Speed -100–+100
Resonance 0–127
Mix
0–127
Pan L64–63R
Low Gain
-15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
45
Explanation
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo" (p. 8)
Frequency of modulation
(p. 72)
Depth of modulation
Amount of feedback
Level of the phase-shifted sound
Stereo location of the output sound
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Output Level
Pan L
2-Band EQ 2-Band EQ
Pan R
Explanation
Higher values will produce a deeper
phaser effect.
Speed at which to raise or lower
the frequency at which the sound is
modulated (+: upward / -: downward)
Amount of feedback
Level of the phase-shifted sound
Stereo location of the output sound
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Output Level
L out
R out