Od Delay; Ds Chorus; Ds Flanger; Ds Delay - Roland AX-Edge Parameter Manual

MFX/IFX Parameters
51 OD 0 DELAY
L in
Overdrive Overdrive
R in
Parameter Value
OD Drive
0–127
(Overdrive Drive)
OD Pan L64–63R
(Overdrive Pan)
Dly Sync
(Delay Time
OFF, ON
(sync switch))
Dly Msec
1–2600 [msec]
(Delay Time (msec))
Note
Dly Note
&
"Note"
(Delay Time (note)) (p. 72)
Dly Fbk
-98–+98 [%]
(Delay Feedback)
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
Dly HF
(Delay HF Damp)
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
D100: 0W–D0:
Dly Bal
(Delay Balance)
100W
Level 0–127
52 DS 0 CHORUS
L in
Distortion Distortion
R in
Parameter Value
Dist Drive
0–127
(Distortion Drive)
Dist Pan
L64–63R
(Distortion Pan)
Cho PreDly
0.0–100 [msec]
(Chorus Pre Delay)
Cho Sync
(Chorus Rate
OFF, ON
(sync switch))
Cho Hz
0.05–10.00 [Hz]
(Chorus Rate (Hz))
Note
Cho Note
&
(Chorus Rate (note)) "Note" (p. 72)
Cho Depth
0–127
(Chorus Depth)
D100: 0W–D0:
Cho Bal
100W
(Chorus Balance)
Level 0–127
Balance D
L out
Balance W
Delay Delay
Balance W
Feedback
R out
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Adjusts the delay time from the direct
sound until the delay sound is heard.
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
Adjusts the frequency above which sound
fed back to the effect will be cut. If you do
not want to cut the high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance between the
sound that is sent through the delay (W)
and the sound that is not sent through
the delay (D).
Output Level
Balance D
L out
Balance W
Chorus Chorus
Balance W
R out
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
Adjusts the delay time from the direct
sound until the chorus sound is heard.
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo" (p. 8)
Frequency of modulation
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through
the chorus (D).
Output Level
53 DS 0 FLANGER
L in
Distortion Distortion
R in
Parameter Value
Dist Drive
0–127
(Distortion Drive)
Dist Pan
L64–63R
(Distortion Pan)
Flg PreDly
0.0–100 [msec]
(Flanger Pre Delay)
Flg Sync
(Flanger Rate
OFF, ON
(sync switch))
Flg Hz
0.05–10.00 [Hz]
(Flanger Rate (Hz))
Note
Flg Note
&
(Flanger Rate (note)) "Note"
Flg Depth
0–127
(Flanger Depth)
Flg Fbk
-98–+98 [%]
(Flanger Feedback)
D100: 0W–D0:
Flg Bal
100W
(Flanger Balance)
Level
0–127
54 DS 0 DELAY
L in
Distortion Distortion
R in
Parameter Value
Dist Drive
0–127
(Distortion Drive)
Dist Pan
L64–63R
(Distortion Pan)
Dly Sync
(Delay Time
OFF, ON
(sync switch))
Dly Msec
1–2600 [msec]
(Delay Time (msec))
Note
Dly Note
&
"Note"
(Delay Time (note))
Dly Fbk
-98–+98 [%]
(Delay Feedback)
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
Dly HF
(Delay HF Damp)
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
D100: 0W–D0:
Dly Bal
(Delay Balance)
100W
Level 0–127
59
Balance D
Feedback
Flanger Flanger
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Frequency of modulation
(p. 72)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Adjusts the volume balance between the
sound that is sent through the flanger
(W) and the sound that is not sent
through the flanger (D).
Output Level
Balance D
Delay Delay
Feedback
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive sound
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Adjusts the delay time from the direct
sound until the delay sound is heard.
(p. 72)
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
Adjusts the frequency above which sound
fed back to the effect will be cut. If you do
not want to cut the high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance between the
sound that is sent through the delay (W)
and the sound that is not sent through
the delay (D).
Output Level
L out
Balance W
Balance W
R out
L out
Balance W
Balance W
R out