Specification; Specifications - SMC Networks PF2D5 Series Operation Manual

Specification

■Specifications

Model
Applicable fluid
Fluid temperature
Rated flow range
Rated pressure range
2
Proof pressure
3
Accuracy
Repeatability
Temperature characteristics
Pulse output
Analogue output
Supply voltage
Power consumption (No load)
Enclosure
Operating temperature range
Operating humidity range
Temperature characteristics
Withstand voltage
Insulation resistance
Standards and regulations
Port size
Materials of parts in contact with fluid
Weight (included lead wire)
1: 1.6 to 20 L/min. when viscosity is 1 mPa
2: Varies depending on the fluid temperature. Refer to the fluid temperature graph and the pressure in the characteristics data (page 20).
3: The system accuracy when combined with PF2D30 .
Lead wire Specifications
Finished outside diameter
Sheath
Material
Colours
Insulator
Outside diameter
Nominal cross section area
Conductor
Outside diameter
PF2D504
Liquid not to corrode nor erode deionized water and/or fluoropolymer.
0.4 to 4.0 L/min
2
Pulse output, N channel, open drain, output for monitor unit PF2D300/301
(Specifications: Max. load current of 10 mA, Max. applied voltage of 30 V)
Min. load impedance: 100 kΩ (Output impedance: 1 kΩ)
Current output: 4 to 20 mA, Accuracy: ±2%F.S. or less
Max. load impedance: 300 Ω or less with 12 VDC, 600 Ω or less with 24 VDC
Operation: 0 to 50 C, Storage: -25 to 85 C (no condensation or freezing)
Operation, Storage: 35 to 85%R.H. (no condensation)
1000 VAC, for 1 minute between the external terminals and case
50 MΩ or more (at 500 VDC) between external terminals and case
3/8
182 g
s (1 cP) or less. (At 0.1 MPa)
●
Brown, White, Black, Blue
PF2D520
Viscosity: 3 mPa s (3 cP) or less
●
0 to 90 C (No freezing or condensation)
1.8 to 20.0 L/min
0 to 1 MPa
1.5 MPa
±2.5%F.S. (at 25 C water)
±1%F.S. (at 25 C water)
±5%F.S. (0 to 50 C, based on 25 C)
Voltage output: 1 to 5 V, Accuracy: ±2%F.S.
12 to 24 VDC ±10%
20 mA or less
IP65
±5%F.S. max. (0 to 50 C, 25 C reference)
CE, RoHS
1/2
newPFA, superPFA
192 g
approx. 3.5 mm
Oil-resistant PVC
approx. 0.9 mm
2
approx. 0.15 mm
approx. 0.5 mm
-18-
PF2D540
1
4 to 40 L/min
0 to 0.6 MPa
0.9 MPa
3/4
275 g
No.PF※※-OMG0006-F