VOX PROCEED TONE
You can set the transceiver to sound an alert tone when you are able to transmit.
This tone is used to prevent missing the beginning of the audio to be transmitted.
1
Enter the Setting mode {p.30}.
2
Press the button programmed as [Channel Up] or [Channel
Down] to select "
3
Press the button programmed as [Channel Menu] then press the button
programmed as [Channel Up] or [Channel Down] to select your desired
value.
4
Press the button programmed as [Channel Menu] to confirm the selection,
then press the PTT switch or the Side button to exit to the operation mode.
".
OFF
VOX proceed tone is not output.
ON
VOX proceed tone is output.
45