Basic Operation; Power On; Adjust The Volume; Select A Channel - Kenwood ProTalk NX-P500 User Manual

POWER ON

Switch the transceiver power ON by turning the
Power switch/ Volume control knob clockwise.
• A confirmation tone sounds, the LCD lights up
momentarily, then the current channel number
are d.
appeare
• Setting the color of the LED that lights up when the power is on, groups can be
color coded when grouping is necessary. Once you have decided on the color
of group, you can discovered which group immediately after turning on the
power. {p.47}

ADJUST THE VOLUME

Set your desired volume level by rotating the Power switch/ Volume control.
• Clockwise increases the volume and counterclockwise decreases the volume.
Note:
◆ To adjust the volume using background noise as a reference in Analog mode, use the
Squelch off Function.

SELECT A CHANNEL

Select a channel by pressing the button programmed as
[Channel Up] or [Channel Down].
• A confirmation tone sounds each time you press the
button programmed as [Channel Up] or [Channel
Down].

BASIC OPERATION

Channel number
16
Power OFF
/ Volume DOWN
Power ON / Volume UP