Nxdn; Selcall Mode (Selective Calling) - Kenwood ProTalk NX-P500 User Manual

NXDN is a general term for the NXDN wireless communication protocol which
uses 4 Level FSK. Various digital communications, including individual and group
voice communications are possible.

SELCALL MODE (SELECTIVE CALLING)

The basic operation is the same as Selcall in FleetSync.
GROUP CALLS:
This function to make calls by calling group parties. Select an ID from a pre-
registered list and call another group parties.
List 2 : own
List 21 : None
Group 25
Can not receive.
Send:
To operation the Group Call:
1
Press and hold the button programmed as [Channel Menu],
or press the button programmed as [ID List].
• The ID List you called last is appeared.
2
Press the button programmed as [Channel Up] or [Channel
Down] to select an group ID number (21-GRP in this
example).
• " " (group call) represents a group of stations.
3
Press the PTT switch to transmit the selected ID.
• When a call is received, "
along with the caller's ID number.

NXDN

List 3 : own
List 21 : None
Group 21
List 1 : own
List 21 : Group
" appears on the display,
21
List 4 : own
List 21 : Group
List 5 : own
List 21 : Group
Transceiver A
Transceiver A
Transceiver D,E