Charging The Battery Pack - Kenwood ProTalk NX-P500 User Manual

CHARGING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before use.
Average battery pack life:
Transmit Power HIGH
Battery Saver on: 15.5 hours
Battery Saver off: 14 hours
• Average times are calculated using 5% transmit time, 5% receive time, and
90% standby time.
1
Plug the AC adapter cable into the jack located on the bottom of the charger.
2
Plug the AC adapter into an AC outlet.
3
Slide a transceiver equipped with a battery
pack into the charging slot of the charger.
• Make sure the metal contacts of the
battery pack mate securely with the
charger metal terminals.
• The indicator lights red and charging
begins.
Transmit Power LOW
Battery Saver on: 16.5 hours
Battery Saver off: 15 hours
DC plug
To AC outlet
5
Charger terminals
LED