Vox Operation - Kenwood TS-450S Instruction Manual

4-11-11. VOX Operation
VOX/OFF switch
1. ANTI control
κα уре 5 x
ANTI control
2. VOX control
VOX control
3. DELAY control
50
С)55В, ΕΜ, AM mode
When the VOX/OFF switch is set to VOX(=), transmit
and receive are switched automatically by speaking into
the microphone in the SSB, FM, and AM modes.
OCW mode
When the VOX/OFF switch is set to VOX, transmt is
selected when the key is depressed, and receive is
selected when the key is up.
VOX operations are sometimes difficult with high
speaker volume control settings. The ANTI control is
used to reduce the tendency of the VOX to activate
from inputs from the speaker. The ANTI control is not
active when headphones are connected.
ANTI-VOX levels may adversely effect the operation of
the VOX circuit. Only use minimal ANTI-VOX levels.
This control adjusts the sensitivity of the VOX amplifier.
Adjust this control for your personal preference.
This control adjusts how long the transceiver will remain
keyed after voice input has stopped.