Channel Menu Mode - Kenwood ProTalk NX-P500 User Manual

Many functions on this transceiver are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system, you
will appreciate the versatility it offers.
1
Press the button programmed as [Channel Menu].
• Appears the setting items of Channel menu mode.
2
Press the button programmed as [Channel Up] or
[Channel Down] to select your desired settings.
3
Press the button programmed as [Channel Menu] then press the button
programmed as [Channel Up] or [Channel Down] to select your desired
value for the settings.
4
Press the button programmed as [Channel Menu] to exit the selection.
5
Press the PTT switch or the Side button to exit Channel menu mode.
Setting item LIST
Display
Transmit Power
Scrambler (Analog)*
Encryption (Digital)*
PTT ID (Analog)*
Selcall on PTT (Digital)*
Compander (Analog)*
VOX
1
* : It can be set when Channel type is Analog or Mixed and Transmit mode is Analog.
2
* : It can be set when Channel type is Digital or Mixed and Transmit mode is Digital.

CHANNEL MENU MODE

Name
Analog Digital
1
2
1
2
1
Low/ High
OFF/ ON
OFF/ ON
OFF/ BOT/ EOT/ BOTH/
List 1~ 99
OFF/ List 1~ 99/
Reserved Group
OFF/ ON
OFF/ ON
24
Settings
Ref.
Pg
25
25
26
27
27
28
29