The Fader Start Feature Doesn’t Work; Bpm Isn’t Displayed; The Sync Feature Or Auto Loop Doesn’t Work; Bpm Or Beatgrid Isn’t Displayed Correctly - PIONEER DJ DDJ-1000SRT Operating Instructions Manual

Others
 The Fader Start feature doesn't work.
• Set a temporary cue.
• Set the [CROSS FADER ASSIGN] switch to [A] or [B] for the
channel that you want to start outputting from.
 BPM isn't displayed. / The Sync feature or Auto Loop doesn't
work.
• Activate [Set Auto BPM] in the offline player setting, then analyze
tracks. For details about analyzing tracks, see the Serato DJ Pro
software manual.
 BPM or beatgrid isn't displayed correctly. / The beatgrid isn't
correct.
• Change the BPM analysis range, then analyze tracks again. If the
problem persists, set the beatgrid and BPM manually.
• Adjust the beatgrid. For details about adjusting the beatgrid, see the
Serato DJ Pro software manual.
• During playback of the track, tap the headphones [CUE] button in
beat while holding the [SHIFT] button (Tap function). The track's
BPM and beatgrid can be adjusted.
When you use the Tap function, the deck section's display on the PC/
Mac screen switches to the [Beatgrid Editor] display. To switch the
deck section's display back to how it was before, click [Edit Grid] on
the PC/Mac screen.
Additional information
117
En