PIONEER DJ DDJ-1000SRT Operating Instructions Manual page 41

Front panel
(1) Headphones
1 Be sure to use the [MASTER 1] output terminals for a balanced
output.
If these terminals are connected to an unbalanced input (such as RCA) using
an XLR to RCA converter cable (or a converter adapter), etc., sound quality
may decrease or noise may occur.
To connect to an unbalanced input (such as RCA), use the [MASTER 2] output
terminals.
2 Be careful not to accidentally insert the power cord plug of another
unit or device into a [MASTER 1] output terminal.
Do not connect devices capable of supplying phantom power to the
[MASTER 1] output terminals.
3 Be sure to use the [BOOTH] output terminals for a balanced output.
If these terminals are connected to an unbalanced input (such as an RCA or
TS terminal) using a TRS to RCA converter cable (or a converter adapter), TS
cable, etc., sound quality may decrease or noise may occur.
41
En
Basic use