Using the Sampler
You can use the Performance Pads to play tracks or sounds assigned
to the Sampler slots.
1 Open the [SAMPLER] panel.
2 Press the [SAMPLER] mode button.
The unit enters Sampler mode.
3 Press the [PARAMETER] or [PARAMETER] button.
Change the Sampler bank. The sampler has 4 banks, A, B, C and D, and each
bank has 8 slots.
4 Drag and drop tracks to load them onto the [SAMPLER] panel's
slots.
The sampler settings and loaded tracks are saved.
5 Press a Performance Pad.
The track or sound assigned to the relevant slot is played.
• Playback method differs depending on the Serato DJ Pro's Sampler mode.
For details, read the Serato DJ Pro software manual.
• When you press a Performance Pad while holding the [SHIFT] button, the
sound of the slot that is currently playing stops.
Slot 1
Slot 2
Slot 5
Slot 6
62
Advanced use
Slot 3
Slot 4
Slot 7
Slot 8
En