Using Pitch Play - PIONEER DJ DDJ-1000SRT Operating Instructions Manual

Using Pitch Play

To use this function, activation for the Pitch 'n Time function is required.
For details, see the Pitch 'n Time DJ Activation Manual in [Extra
software information] on the Pioneer DJ support page.
pioneerdj.com/support/
1 Press the [SAMPLER] mode button while holding the [SHIFT]
button.
The unit enters Pitch Play mode.
2 Press a Performance Pad while holding the [SHIFT] button to select
a set Hot Cue point.
3 Press the Performance Pad.
To select the pitch range to Up range, Middle range or Down range, press the
[PARAMETER] button or [PARAMETER] button.
With the pitch set on the pad you pressed, playback starts from the Hot Cue
point selected in step 2.
Up range
Middle range
+4 +5
0 +1
0 +1
-4 -3
67
En
Advanced use
+6 +7
+2 +3
+2 +3
-2 -1