Using Roll - PIONEER DJ DDJ-1000SRT Operating Instructions Manual

Using Roll

When you press a Performance Pad, a loop with the number of beats
assigned to the pad is set and the loop plays until you release the pad.
During loop roll playback, normal playback with the original rhythm
continues in the background. When a loop roll is canceled, playback
resumes from the position reached in the background.
1 Press the [ROLL] mode button.
The unit enters Roll mode.
2 Press the [PARAMETER] or [PARAMETER] button.
The loop roll beats assigned to Performance Pad 1 through 4 switch each time
you press a button.
For example, when you set a pad to "2 to 16 beats," the pad's setting is as
shown below.
The range of beats set for the loop roll is displayed on the PC/Mac screen.
3 Press and hold down one of the Performance Pads.
A loop roll with the number of beats in the settings assigned to that pad is
played.
Playback continues in the background during loop roll playback.
• While holding the [SHIFT] button, press the [LOOP IN] or [LOOP OUT]
button during loop roll to change the number of beats for the current playback
loop roll.
2 beats 4 beats
57
Advanced use
8 beats 16 beats
En