Mixing The Sound Of Turntables, Etc. - PIONEER DJ DDJ-1000SRT Operating Instructions Manual

Mixing the sound of turntables, etc.

1 Connect turntables or other phono level (for MM cartridges) output
devices to the [LINE/PHONO] input terminals of [CH3] or [CH4].
• [CH1] and [CH2] are input terminals for [LINE] only.
• Connect the ground wire of the turntable to the [SIGNAL GND] terminal of
the unit.
2 Set the [LINE/PHONO] switch on the rear panel of the unit to
[PHONO].
3 Set the [USB A, PHONO/LINE, USB B] switch on the top panel of
the unit to [PHONO/LINE].
4 Turn the [TRIM] knob and move the channel fader to adjust the
volume of the sound output from each channel.
Advanced use
93
En