Crossfader Cut Lag setting
Adjust the cut lag (range of no sound) on both edges of the crossfader.
The setting value is the size of the cut lag.
Setting item: [CR FDR CUT LAG]
Setting values: [0] to [52]
Default setting is [7].
Slip mode flashing setting
When Slip mode is on, the buttons that can be operated in Slip mode
([4 BEAT LOOP] button, [PLAY/PAUSE ] button, etc.) will flash.
This setting can be used to disable the flashing of these buttons.
Setting item: [SLIP FLASHING]
• [ENABLE]
Slip mode flashing is enabled.
• [DISABLE]
Slip mode flashing is disabled.
Default setting is [ENABLE].
Changing the settings
105
En