GE MDS RCL220 Manual page 74

RCL220_manual_v3-draft.doc
Parameter Description
A) TFTP Host IP address of the host computer from which
Address to get the file.
B) Firmware Name of file to be received from the TFTP server.
Filename Verify that this string corresponds to the TFTP
directory location. May require a sub-directory; for
example: firmware/sln-3_2_4.mpk.
C) TFTP Timeout Time in seconds the TFTP server waits for a packet
ACK (acknowledgment) from the unit before
suspending the file transfer.
D) Retrieve File Initiate the file transfer from the TFTP server. The
received image is placed into the inactive firmware
position in the transceiver non-volatile memory.
E) Image Verify Initiate integrity verification of the firmware file held
in the unit.
F) Image Copy Copying the active firmware into the inactive image.
G) Reboot Device Restart the unit. Use this command to toggle
between firmware images.
Current Firmware Shows the current firmware revision level.
4.3.8.2 Configuration Scripts Menu
If you plan to have more than a few transceivers in your network, you may want to use the
Configuration Script feature to configure similar radios from a common set of parameters. Over 50
customer settings that optimize the network are saved in a configuration file (text file). However, only a
few essential parameters need to be reviewed and altered to use the file with another transceiver.
A configuration file makes it easy to apply your unique settings to any transceiver(s) you wish.
Configuration files also provide you with a tool to restore parameters to a known working set, in the
event that a parameter is improperly set and performance is affected.
05-XXXXA01 Version 3 Draft Page 74 of 79
Values
Any valid IP address;
127.0.0.1
Any 40-char
alphanumeric string;
blank; firmware.mpk
10-120; 30
y, n
1, 2
y, n
1, 2
0.0.0
9/20/2016