Table of Contents
Advertisement
RCL220_manual_v3-draft.doc
Optional Arguments:
<username> Write Only for all users, starting at Administrator. The login user
name for which the password will be changed.
3.2.14
PROGRAM
Usage: PROGRAM {STATUS}{VERIFY=<verify>} {MODE=<mode>}
{START_COUNT=<start_count>} {IMAGENUM=} {STATUS=}
Description: Allows a boot to the bootloader. At prompt enter 'y' or 'n'.
NOTE: CMD=1 command not supported.
Access Level: Administrator
Optional Arguments:
STATUS Read Only. Displays image reprogram statusVERIFY=<verify> Write Only
for all users, starting at Administrator. Select one or all images to perform checksum
verification
ALL
BOOT
APP1
APP2
DSP1
DSP2
MCU1
MCU2
MODE=<mode > Read/ Write for all users listed above.
COM1_RECEIVE
RADIO_RECEIVE
RADIO_SEND
COM1_SENDTEST
START_COUNT=<integer> Read/ Write for all users listed above.
Acceptable value range: 0 - ????
IMAGENUM=Read Only. The image index.
STATUS= Read Only.
05-XXXXA01 Version 3 Draft
All images
Bootloader Image
App 1 Image
App 2 Image
DSP 1 Image
DSP 2 Image
MCU 1 Image
MCU 2 Image
Accept reprogramming over the local serial port
Request reprogramming over the air
Serve reprogramming requests over the air
Initiate reprogramming over the local serial port
Page 40 of 79
9/20/2016
Advertisement
Table of Contents
