Yard - GE MDS RCL220 Manual

RCL220_manual_v3-draft.doc
Allowable length: 1 - 8 characters.
IMAGE=<image> Read/ Write for all users, starting at Administrator. Selects boot
image index.
Acceptable value range: 1 – 2
DSPSW= Read Only for all users listed above. Current Radio DSP Software Version
number. (xx.yy.zz)
Allowable length: 1 - 15 characters.
MCUSW= Read Only for all users listed above. Current Radio MCU Software
Version number. (xx.yy.zz)
Allowable length: 1 - 15 characters.
CONFIG= Read Only. Config Table Version
EVENT= Read Only for all users listed above. This command is used to determine
whether the current Event list properties need to be upgraded or not.
LOG= Read Only for all users listed above. This command is used to determine
whether the current Log format needs to be upgraded or not.
HREV= Read Only. OIB Board Hardware Revision
Allowable length: 1 - 8 characters.
XHREV= Read Only. OEM Radio Board Hardware Revision.
Allowable length: 1 - 8 characters.
CMD=<cmd> If set to 0, the command executes normally. If <cmd> is set to 1, the
command reports all settings in a format that may be copied into a configuration
script.
3.2.21

YARD

Usage: YARD {CLEAR} {SHOW} {MODE=<mode>} {COORDMODE=<coordmode>}
{MINRSSI=<minrssi>} {RSSI=<rssi>} {ID=<id>} {SHAPE=<shape>} {ROT=<rot>}
{LAT=<lat>} {LON=<lon>} {XDIM=<xdim>} {YDIM=<ydim>} {COUNT=<count>}
{CMD=<cmd>}
Description:
05-XXXXA01 Version 3 Draft Page 48 of 79 9/20/2016