Radio - GE MDS RCL220 Manual

RCL220_manual_v3-draft.doc
IDLE
CLI_REPROG
COM1_UPDATE
RADIO_SEND_LISTEN
RADIO_SEND_UPDATE
RADIO_REQUEST
RADIO_UPDATE
COM1_SEND
3.2.15

RADIO

Usage: RADIO {COMMITCHANS} {UNITADDR=<unitaddr>} {RSSI=} {MODE=<mode>}
{COORDMODE=<coordmode>} {TXKEY=<txkey>} {BFREQ1=<bfreq1>}
{MFREQ1=<mfreq1>} {BFREQ2=<bfreq2>} {MFREQ2=<mfreq2>} {BFREQ3=<bfreq3>}
{MFREQ3=} {BFREQ4=<bfreq4>} {MFREQ4=} {AUXTX=<auxtx>} {AUXRX=<auxrx>}
{TIMESLOT=<timeslot>} {YARDRSSI=<integer>} {TXSTART=<number>}
{SYNCTIMEOUT=<synctimeout>} {GROUPTIMEOUT=<grouptimeout>} {CMD=<cmd>}
Description: Set / display the radio configuration and status.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
COMMITCHANS Update ROR channels 3/4 with last RCL Sync
UNITADDR=<unitaddr> Read/ Write for all users, starting at Administrator.
Current Radio RCL Unit Address.
Acceptable value range: 1 - 2097151
MODE=<mode> Read/ Write, starting at Distributor. Current Radio Mode.
NORMAL
MAINT
CAL
TEST
TRAFFIC
COORDMODE=<coordmode>
CCM
DCM
05-XXXXA01 Version 3 Draft
no update in progress
Receiving reprogramming over the console
Receiving reprogramming over the local serial por
Server awaiting reprogramming requests over the
air
Server sending reprogramming over the air
Requesting over the air reprogramming
Receiving over the air reprogramming
Server sending reprogramming over the local seria
Normal TDMA Mode <default>
Maintenance Mode, Low Power with no TDMA
Calibration no TDMA Mode
Test Mode, Low Power with TDMA
Traffic TDMA Mode
Centralized Coordination Mode
Distributed Coordination Mode
Page 41 of 79 9/20/2016