Table of Contents
Advertisement
RCL220_manual_v3-draft.doc
Description: Set/Display the current version Information.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
BOOTREV= Read Only for all users listed above. Bootloader Software
RevisionSWID1= Read Only for all users listed above. Current Image 1 Software ID
text. (06-nnnnAnn)
Allowable length: 1 - 10 characters.
SREV1= Read Only for all users listed above. Image 1 Software version number.
(xx.yy.zz)
Allowable length: 1 - 8 characters.
DSREV1= Read Only for all users listed above. Display ROR radio DSP software
image 1 version.
Allowable length: 1 - 8 characters.
MSREV1= Read Only for all users listed above. Display ROR radio MCU software
image 1 version.
Allowable length: 1 - 8 characters.
SWID2= Read Only for all users listed above. Current Image 2 Software ID text.
(06-nnnnAnn)
Allowable length: 1 - 10 characters.
SREV2= Read Only for all users listed above. Image 2 Software version number.
(xx.yy.zz)
Allowable length: 1 - 8 characters.
DSREV2= Read Only for all users listed above. Display ROR radio MCU software
image 2 version.
Allowable length: 1 - 8 characters.
MSREV2= Read Only for all users listed above. Display ROR radio MCU software
image 2 version.
05-XXXXA01 Version 3 Draft
Page 47 of 79
9/20/2016
Advertisement
Table of Contents
