Summary of Contents for Lincoln FlowMaster A Series
Page 1
FlowMaster™ Single Action Rotary Driven Hydraulic Pump For 5 Gallon Pail/Container Model: 85486 Series “A” U. S. Patent No. 6,102,676 Foreign Patent Pending This pump conforms to the European Directive for Product Safety - A21 - 6H 7.5A-18110-J00 JUNE 2005 Form 403566 Page Section...
General Description must be followed. The Lincoln Industrial FlowMaster Pump Model 85486 is a fully hydraulically operated grease pump. Grease output is Operate this pump only after safety instructions and this ser- proportional to the hydraulic input flow. The pump is vice manual are fully understood.
(bar) - 450 (32) Typical installation is shown only as a guide for selecting and Hydraulic Inlet Flow, installing system components. Contact your Lincoln GPM (l/min) - Up to 7 (28) Industrial representative for assistance in designing a Pump Ratio - 10:1 system to suit your specific needs.
16. Unscrew the Plunger Tube (11) from the Outlet Pin (9). injury from injection, splashing fluid or moving parts. 17. To dismantle the Crankrod Assembly (1 through 8), Always use Lincoln Industrial parts for service and repair. remove Flat Head Screws (1) and the Counter Weights (2).
FlowMaster™ Rotary Driven Hydraulic Pump 4. Install parts (22) through (28) into the Reciprocating Tube C. Plunger Tube (11) to Plunger Link Rod (17) - 100 to (21) after the plunger assembly (9 through 20) is 110 In.-Lbs. D. Plunger Link Rod (17) to Pump Plunger (20) - 100 to installed.
Page 6
FlowMaster™ Rotary Driven Hydraulic Pump Illustration #1 252725 Follower Plate Illustration #2 Page Number - 6 7.5A-18110-J00 Form 403566 To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com...
Need help?
Do you have a question about the FlowMaster A Series and is the answer not in the manual?
Questions and answers