Network Settings - Dahua 3000 Series User Manual


Please make sure that USB area scan camera is properly connected to the PC.
 Please install the application in the PC. If have any problems, please refer to ―3.2 Software
Installation‖ for details.
When the camera is well connected with cables, the application installed can detect the online camera.
The detailed steps for network settings are as follows:
Step1 Client installation.
Double client the installation package and install MV Viewer program according to the prompt
on the interface. You can see Figure 4-1 after installation.
Step2 Open software.
Double click desktop shortcut
4
Figure 4-1 Installation Completion
, open client software. The software will auto detect all

Network Settings

Network Settings
27