Transportlayercontrol - Dahua 3000 Series User Manual

Parameter
LUTSelector
LUTEnable
LUTIndex
LUTValue
LUTValueAll
5.7

TransportLayerControl

In this property, you can set parameters related to camera's transport layer protocol, as shown in Figure
5-7; please refer to Sheet 5-8 for detailed parameter settings.
Parameter
PayloadSize
GevTimestampTickFrequency
U3vCurrentSpeed
Figure 5-6 LUT Control
Sheet 5-7 LUT Control - Parameter Explanation
Explanation
Selects the channel of LUT.
Currently only Luminance（brightness）Look-Up Table is supported.
LUT setting.
1. Enables LUT for LUT lookup table function.
2. Sets digital points of the lookup table in LUTIndex with range of
0~4095.
3. When LUTIndex is selected, you can set corresponding values in
LUTValue.
Sets all the values of Index to the same value.
Figure 5-7 Transport Layer Control
Sheet 5-8 Transport Layer Control - Parameter Explanation
Explanation
The number of bytes transferred for each image or
chunk on the stream channel.
Defines the tick frequency of the timestamp.
Current connection speed of the camera.
Main Function Description
44