Table of Contents
Advertisement
Menu
5
5.1 HCVR Settings
5.1.1 Control Coaxial Device
This HDCVI camera series can adjust OSD menu via coaxial control. After connected the
camera to the HDCVI series HCVR, from Main Menu->Setting->System->PTZ, you need to
select the channel number for access and set control mode as HDCVI and the protocol as HD-
CVI. Click "Save" button to save current setup. See Figure 5-1.
Figure 5-1
5.2 Menu Operation
Click the right mouse button and select "PTZ Control", then you will see the "PTZ Setup" menu,
which is as shown in Figure 5-2 and Figure 5-3.
Figure 5-2
6
Advertisement
Table of Contents
