Installing Software - Sony PCWA-C100 Operating Instructions Manual

Installing software

Before Installing the
software:
• Install and connect the
Access Point.
• Install the driver
software. (page 13)
• Insert the Wireless
LAN PC Card. (page
12)
• Quit all Windows
programs.
z Tip
If you want to install the
software into another
folder, click Browse and
select the folder or
directly enter the folder
name.
40
Once you set up your Windows environment, install
the Wireless Palette, the Basic Setup Utility, and the
Custom Setup Utility software.
1
From the Start menu, click Run.
The Run dialog box appears.
2
Enter the name of the installer.
• If the computer has an internal CD-ROM drive,
enter "Q:\SETUP.EXE." ("Q" indicates the name
of the internal CD-ROM. Your CD-ROM drive
may be identified with a different letter.)
• If you have copied the Wireless LAN folder from
the supplied CD-ROM to your computer's hard
disk, say in the C:\Temp folder, when installing
the driver software on page 13, enter
"C:\Temp\WirelessLAN\SETUP.EXE."
3
Click OK.
The Wireless LAN Utility Setup dialog box
appears.
4
Click Next.
The License Agreement dialog box appears.
5
Read the agreement and click Yes to accept.
The Choose Destination Location dialog box
appears.
6
Select the folder where you want to install the
software and click Next.
The Setup Type dialog box appears.