Task Flow - Sony PCWA-C100 Operating Instructions Manual

Task flow

To build a wireless LAN environment, you must configure both the
Access Point and the Wireless LAN PC Card.
Required tasks depend on the state of your Access Point and Wireless
LAN PC Card. The table below lists their states and tasks required for
building a wireless LAN environment.
Access
Point
*1 See Connections in the Access Point Operating Instructions manual.
*2 See Inserting the Wireless LAN PC Card and succeeding sections in this
*3 See To establish communication with the Access Point and succeeding
*4 See Setting up the Access Point and succeeding sections in this manual.
6
Wireless LAN PC Card
1. Connect the Access
Point. (*1)
2. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows
environment and
New
install software. (*2)
3. Register the Access
Point using the
Wireless Palette. (*3)
4. Configure the Access
Point using the Basic
Setup Utility. (*4)
1. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows
environment and
In use
install software. (*2)
2. Register the Access
Point using the
Wireless Palette. (*3)
manual.
sections in this manual. For further information, see the Wireless Palette Help
files.
New
1. Connect the Access
2. Register the Access
3. Configure the Access
• To communicate with
1. Register the Access
In use
Point. (*1)
Point using the
Wireless Palette. (*3)
Point using the Basic
Setup Utility. (*4)
an Access Point
previously used in
another wireless LAN
environment from a
computer containing
the Wireless LAN PC
Card.
Point using the
Wireless Palette. (*4)