Sony PCWA-C100 Operating Instructions Manual page 46

z Tip
A wireless LAN
environment between
multiple computers may
also be established in the
Peer to Peer mode.
46
5
Click OK.
The Tool Box window reappears.
6
Select the Nickname of the Access Point to which
you want to connect.
7
Click Select.
8
Click OK.
The Nickname of the selected Access Point is
displayed on the Wireless Palette.
If an error message is displayed, the information
you entered contains an error. Go back and repeat
step 3 through step 8.
To establish a wireless LAN environment
without using the Access Point (Peer to Peer
mode)
To establish a wireless LAN environment without
using the Access Point, follow the steps in this section
on only one of the computers on the wireless LAN. On
the other computers, perform the procedure described
in the section, To establish communications with the
Access Point on page 44.