Installing The Software - Sony BKDS-2530 Operation Manual

Installing the Software

The BZS-2050 Operation Software is contained on two
floppy disks. One contains the graphical interface GUI
application and the other contains device driver
settings file. Two more floppy disks are supplied with
the BZS-2050. Those contain the User's Guide files
(Japanese and English versions).
Installing the GUI application
1
Turn on the computer with the CPU-252 installed,
and log in to Windows NT.
2
Insert Disk 1 into the floppy disk drive.
3
Run "Setup.exe" from Disk 1.
The setup screen will be displayed.
4
Follow the instructions on the screen to perform
the installation.
5
When "Setup is complete." is displayed in the
dialog box, click "OK" to end the installation.
The compressed file GUI.z will be uncompressed,
and the BZS-2050 startup file "2000gui.exe" will
be created (in the C:\Program Files\2000-gui
folder).
Setting up the device driver
1
Install the GUI application, using the procedure
described above under "Installing the GUI
application".
2
Insert Disk 2 into the floppy disk drive.
3
Run "Setup.exe" from Disk 2.
The setup screen will be displayed.
4
Follow the instructions on the setup screen to
perform the installation.
5
When "Setup is complete." is displayed in the
dialog box, click "OK".
The compressed file Driver.z will be
uncompressed, and the system file
"cpu252.system" will be created (in the
C:\winnt\system32\drivers folder).
6
Restart Windows NT and run "2000gui.exe".
7(E)