Connection Details/Dimensions - 215, 225 And 235 Models; Connection Details/Dimensions; Connection Details/Dimensions - 245 Model - gledhill BoilerMate A-Class OV SOL Series Design, Installation & Servicing Instructions

Connection Details/Dimensions - 215, 225 and 235 models

560
45
85
210
275
480
515

Connection Details/Dimensions - 245 model

610
55
110
240
295
525
565

Connection Details/Dimensions

Diagrams opposite show the connection details
and dimensions for the BoilerMate A-Class OV
SOL appliance.
The BoilerMate A-Class OV SOL units are supplied
on an installation base to allow the pipe runs
to connect to the appliance from any direction.
It is easier if all pipes protrude vertically in the
cut out area shown. Compression or push fit
connections can be used. All pipe positions
are approximate and subject to a tolerance of
+/-20mm in any direction. A 15mm cold water
supply and a 22mm warning/overflow pipe
will also be required for the separate feed and
expansion tank.
Note: All dimensions are shown in mm and
are to the centre line of pipework/gland.
Figure 1.5
Figure 1.6
Page 9
DESIGN