Siemens CP 1243-8 IRC Operating Instructions Manual page 54

Configuration and operation
4.6 Configuration in STEP 7 V5
Configuring with the SINAUT Engineering Software
Configure the connection of the proxy in the SINAUT configuration tool as usual for a TIM.
Note that for the proxy, neither TD7onCPU nor TD7onTIM is configured.
In the subscriber management of the configuration to, the proxy appears as follows:
Figure 4-5 View of a proxy in the SINAUT subscriber administration
If you double-click on the selected subscriber (proxy) in the subscriber list, you will find the
corresponding entry for the expanded type in the properties dialog of the subscriber:
Figure 4-6
54
Expanded type of the proxy in the Properties dialog of the subscriber
Operating Instructions, 06/2015, C79000-G8976-C385-01
CP 1243-8 IRC