Siemens CP 1243-8 IRC Operating Instructions Manual page 118

Accessories
C.1 TS modules
Note
Use the supplied cable with ferrite to comply with EMC values and make sure that the ferrite
is on the module side.
To use the TS Module Modem outside Germany, you can fit a country-specific TAE
connector onto the RJ11 connector of the phone cable. For Germany, a TAE6N connector is
supplied. In some countries, telephone jacks with RJ-11 sockets are available, so that the
telephone cable can be used without TAE connectors.
Specifications
● Dimensions (WHD): 30 x 100 x 75 mm
● Weight: 98 g
● ITU transmission standards:
V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34, V.34x, K56flex, V.90, V.92
●
● a/b port
● Hayes command set (AT)
● All data formats
● Dialing mode: Multifrequency signaling (DTMF), pulse dialing
National approvals
The TS Module Modem is designed so that worldwide use is possible. When installing and
operating the TS Module Modem, keep to the country-specific laws and special features.
The TS module has a telecommunications approval in the following countries:
• Australia
• Belgium
• Bulgaria
• Denmark
• Germany
• Estonia
• Finland
• France
• Greece
• Great Britain
• Ireland
For information on approval in other countries, please contact Technical Support.
118
Error correction and data compression
• Iceland
• Italy
• Canada
• Latvia
• Lithuania
• Luxembourg
• Malta
• New Zealand
• Netherlands
• Norway
• Austria
Operating Instructions, 06/2015, C79000-G8976-C385-01
• Poland
• Portugal
• Romania
• Sweden
• Switzerland
• Slovakia
• Slovenia
• Spain
• Czech Republic
• Hungary
• USA
• Cyprus
CP 1243-8 IRC