Playing A Disc With Mp3 Files - Sony RCD-W2000ES Operating Instructions (primary manual) Operating Instructions Manual

Tip
To specify a desired playback order, before the folder
or file name, input the order by number (e.g., "01",
"02"), then record contents onto a disc. (The order
differs depending on the writing software.)
Note on playback of MP3 files
Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 file is recorded, you may encounter such
problems as disabled playback, sound interruptions,
and noise.

Playing a disc with MP3 files

(DECK A only)
This system lets you play discs with MP3 files.
When using the remote, set DECK A/DECK B
to DECK A.
POWER
DISC 1-5 A
ALBUM AMS
N x
PLAY MODE
X
DECK A/DECK B
PLAY MODE
X
./>
1
Turn on your amplifier and adjust the
volume to the minimum.
2
Set your amplifier's input selector to
select this unit.
3
Press POWER.
4
Press one of the DISC 1-5 A buttons
and place a disc with MP3 files. Press
A again to close the disc tray.
5
Press PLAY MODE repeatedly to select
the Continuous play mode.
When you
select
ALL DISCS
1 DISC
ALBUM*
* When a disc that contains no album is played
6
To select an album, press ALBUM until
the ALBUM SELECT indicator in the
H
display lights up, then turn AMS until
x
the album you want appears (or press
ALBUM +/–
ALBUM +/– on the remote).
7
Press N (or
The unit starts playing. Adjust the volume on
the amplifier.
With the label side up
The unit plays
All discs in the unit consecutively
in the order of the disc number.
Only one disc you have selected.
All MP3 files in the selected album
on the selected disc.
with "ALBUM" selected, the disc is played in
the same way as 1 DISC mode.
on the remote).
H
continued
11