Basic Operations; Playing A Cd - Sony RCD-W2000ES Operating Instructions (primary manual) Operating Instructions Manual

Basic Operations

Playing a CD

This unit has two decks.
In this manual, the CD player section is just
called DECK A, and the CD-R and CD-RW
recording section is called DECK B.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A (the CD player
section), or to DECK B to operate DECK B
(the CD-R or CD-RW recording section).
POWER DISC 1-5 A
N
x AMS
X
PLAY MODE
DECK A/DECK B
PLAY MODE
./>
DISC SKIP
1
Turn on your amplifier and adjust the
volume to the minimum.
2
Set your amplifier's input selector to
select this unit.
3
Press POWER.
8
OPEN/CLOSE
AMS X x
N PLAY MODE
H
X x
4
Press OPEN/CLOSE (or one of the DISC
1-5 A buttons for DECK A) and place a
disc on the inner circle of DECK A (or
B). Press OPEN/CLOSE (or A) again to
close the disc tray.
With the label side up
5
For DECK A, press PLAY MODE
repeatedly to select the Continuous
play mode.
When you
The unit plays
select
ALL DISCS
All discs in the unit consecutively
in the order of the disc number.
1 DISC/
Only one disc you have selected.
ALBUM
6
Press N (or on the remote).
H
The unit starts playing. Adjust the volume on
the amplifier.
Do the following:
To
Press x.
Stop playback
Press X. Press the button again or
Pause playing
N (or
press
to resume playing.
Select the disc
Press one of the DISC 1-5 buttons.
(for DECK A)
Go to the next disc
Press DISC SKIP on the remote.
(for DECK A) Z
Go to the next
Turn AMS* clockwise while the
track
ALBUM SELECT indicator in the
display is turned off (or press >
on the remote ).
Go to the beginning
Turn AMS counterclockwise while
of the current track
the ALBUM SELECT indicator in
or the preceding
the display is turned off (or press
track
. on the remote).
Remove the disc
Press OPEN/CLOSE (or A),
whichever contains the disc you
want to remove after stopping play.
*AMS: Automatic Music Sensor
H on the remote)