Sony RCD-W2000ES Operating Instructions (primary manual) Operating Instructions Manual page 24

Notes
• You cannot pause recording in Synchro-Recording.
• If Repeat Play is selected, it is automatically
canceled.
• If Shuffle Play is selected, it is automatically
canceled.
• The following functions do not work while
Synchro-Recording:
– Silent Pause function
– Level Sync function
– Manual Track Making function
– Fade-in, Fade-out recording
– Recording level adjustment (the recording level is
set to the same as original disc)
• During Synchro-Recording, the Direct Recording
function is turned on regardless of the menu setting.
• When copying a disc digitally recorded under
control of the Serial Copy Management System
(SCMS), the unit automatically select the analog
recording. High speed recording changes to normal
speed recording. For details on SCMS, see page 21.
• When copying a commercial music CD contains
copy protection code, the unit automatically select
the analog recording. High speed recording changes
to normal speed recording.
• SBM function is available only for analog
recordings (page 35).
• You cannot stop recording when finalizing in
Make-Disc Synchro-Recording.
24
High-Speed Synchro-Recording
You can easily make digital recordings from a
CD to a CD-R or CD-RW, faster than normal
speed Synchro-Recording. You cannot monitor
the recorded signal while recording. To use
Make-Disc Synchro-Recording, set "Make
Disc" in the menu to "On" beforehand (page
36).
When using the remote, set DECK A/DECK B
to DECK B.
POWER DISC 1-5 A
CD SYNCHRO HIGH
DECK A/DECK B
H
1
Press POWER.
2
Press OPEN/CLOSE of DECK B and
place a recordable CD-R or CD-RW on
the disc tray. Press OPEN/CLOSE of
DECK B again to close the disc tray.
With the label side up
"TOC Reading" appears. The unit starts to
read the TOC (Table of Contents) data and
shows the type of the disc on the deck in the
display.
OPEN/CLOSE
N
x
CD SYNCHRO
HIGH
x