Playing Both Deck Simultaneously (Dual Play) - Sony RCD-W2000ES Operating Instructions (primary manual) Operating Instructions Manual

Playing Both Deck
Simultaneously (Dual Play)
If you have 2 amplifiers in different locations
in your house, you can connect the unit to each
amplifier and play two discs simultaneously on
both DECK A and DECK B.
The sound of DECK A is output from OUT 1
jacks and the sound of DECK B is output from
OUT 2 jacks.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A, or to DECK B
to operate DECK B.
RCD-W2000ES
L
L
R
R
IN
OUT 2
ANALOG
l l l
l l : Signal flow
DISC 1-5 A
N
x
1
Connect the unit to 2 amplifiers.
2
Press OPEN/CLOSE (or one of the DISC
1-5 A buttons for DECK A) and place
the discs you want to play on the inner
circle of DECK A and DECK B. Press
OPEN/CLOSE (or A) of the decks again
to close the disc trays.
20
L
R
OUT 1
Amplifier
Amplifier
DUAL MODE
OPEN/CLOSE
N x
3
While the unit is stopped, press DUAL
MODE.
"DUAL" indicator lights up in the display.
4
Press N (or H on the remote).
The unit starts playing. Adjust the volume
on the amplifier.
To stop Dual Play
Press x.
Notes
• The front panel display will show you the sound
level of the deck (A or B) you operated last. If you
want to see the other deck's sound level, press N
(or H on the remote) of the other deck during
playback. In this case, the headphones output will
be also changed to the deck you selected.
• When the DUAL MODE is set to off, the sound of
the deck (A or B) currently playing is output to both
OUT 1 and OUT 2 jacks.
Tip
As well as the analog connections illustrated in the
left column, you can also enjoy the Dual Play
function when you connect the unit to amplifiers
using the OPTICAL DIGITAL OUT or DIGITAL
COAXIAL OUT connections of the unit.