Mitsubishi AJ65SBT2B-64AD User Manual page 63

5
PROGRAMMING
(c) Station information setting
(2) Program example
Refer to Section 5.3 (2) and Section 5.3 (3), and use the program example for the
QCPU.
Remark
To configure the system with the default I/O assignment of the LCPU, change some
devices of the program example in Section 5.3 (3) to the ones indicated in Table 5.6.
Figure 5.11 "Station Information Module 1" dialog box (when using the LCPU)
Table 5.5 "Station Information Module 1" dialog box setting (when using the LCPU)
Setting item
Station Type
Exclusive Count
Reserve/Invalid Station Select
Table 5.6 List of devices used in the program example (when using the LCPU)
Device Changed to
X0 X10 Module error
X1 X11 Host data link status
XF X1F Module ready
X21 X31 Signal which is turned on to reset Error flag
X22 X32 Signal which is turned on to change the initial settings
5.4 Program Example When Using the LCPU
Setting value
Remote Device Station
Exclusive Station 1
No Setting
Description
1
2
3
4
5
6
5
- 11