5 COMMUNICATION
5.1
Interface
A USB port and an intelligent slot are provided for the monitoring software.
5.1.1
USB
The USB port is compliance with USB 1.1 protocol.
5.1.2
AS400 Interface (Option)
PowerValue 11 UPS has AS400 card (an optional accessory) for AS400 communication protocol. Please
contact your local distributor for details. The following is the pin assignment and description of DB-9
connector in AS400 card.
Pin # Description
1
UPS Fail
2
Summary Alarm
3
GND
4
Remote Shutdown
5
Common
6
Bypass
7
Battery Low
8
UPS ON
9
Line Loss
Table 6: AS400 Interface I/O
Figure 9: DB-9 Interface of AS400 communication protocol
04-3598_ABB_PVA11_T_1-3kVA_EN_REV-B.doc
Modifications reserved
I/O
Output
Output
Input
Input
Input
Output
Output
Output
Output
Page 24/29 ABB