Safety Notes - T+A HV SERIES User Manual

Hide thumbs Also See for HV SERIES:
Table of Contents

Advertisement

Available languages

Available languages

Installation
Operation
Power supply
Mains leads / Mains plug

Safety notes

or your own safety please consider it essential to read these operating
instructions right through, and observe in particular the notes regarding
setting up, operation and safety.
Please consider the weight of the device. Never place the device on an
unstable surface; the machine could fall off, causing serious or even fatal
injury. Many injuries, especially to children, can be avoided if the following
simple safety precautions are observed:
Use only such items of furniture which can safely bear the weight of the
device.
Ensure that the device does not project beyond the edges of the
supporting furniture.
Do not place the device on tall furniture (e.g. bookshelves) without
securely anchoring both items, i.e. furniture and device.
Explain to children the hazards involved in climbing on furniture to reach
the device or its controls.
When installing the unit on a shelf or in a cupboard it is essential to provide
an adequate flow of cooling air, to ensure that the heat produced by the unit
is dissipated effectively. Any heat build-up will shorten the life of the unit
and could be a source of danger. Be sure to leave free space of 10 cm around
the unit for ventilation.
The ventilation openings must not be covered or closed.
If the system components are to be stacked then the device must be the top
unit. Do not place any object on the top cover.
The unit must be set up in such a way that none of the connections can be
touched directly (especially by children). Be sure to observe the notes and
information in the section 'Installation and Wiring'.
Never operate the disc player without the pressure puck in place.
Before closing the drawer, place the pressure puck centrally on the disc.
Ensure that the puck is level, horizontal, and lies squarely on the disc. If the
puck is not straight, please be sure to correct this before operating the Close
button.
Closing the disc drawer without the pressure puck in place, or with the puck
incorrectly positioned, may result in damage to the disc and the device.
Caution when closing the disc drawer INJURY HAZARD !!!!
The drawer opens or closes slowly when you operate the OPEN/CLOSE
button. Please ensure that nothing - such as your fingers or any object - gets
into the drawer, or comes between the drawer fascia and the device.
Operating the Open/Close button a second time stops the drawer
immediately, and reverses its direction of travel.
The mains power supply to which the unit is connected must be grounded
properly and must meet the current regulations. The power supply required
for this unit is printed on the mains supply socket. The unit must never be
connected to a power supply which does not meet these specifications. If
the unit is not to be used for a long period disconnect it from the mains
supply at the wall socket.
Mains leads must be deployed in such a way that there is no danger of
damage to them (e. g. through persons treading on them or from furniture).
Take particular care with plugs, distribution panels and connections at the
device.
To disconnect the device completely from mains power supply, the mains
plug must be withdrawn from the wall socket. Please make sure that the
mains plug is easily accessible.
49

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Pdt 3100 hv

Table of Contents