Playback Program - T+A HV SERIES User Manual

Creating a Playback
Program
Playing a playback
program
Erasing a playback
program

Playback program

Explanation
A playback program consists of up to thirty tracks of a CD / SACD stored in
any order you like. This can be useful, for example, when you are preparing a
cassette recording. A playback program can only be created for the CD
currently in the disc drawer of the PDT 3100 HV. The program remains stored
until it is erased again, or until the CD drawer is opened.
Operation
When you place the CD in the drawer, the screen displays the total number of
tracks on the disc, e.g.: '13 Tracks 60:27'.
 A playback program is created as follows:
 Press the select knob long while the CD is stopped.
The screen displays the message 'Add Track 1 to program'
Repeatedly press the  or  button briefly until the number of the
desired track appears on the screen after 'Track'.
 Now store the track in the playback program by briefly pressing the 
button.
The screen shows the number of tracks and the total playing time of the
play-back program. Select all the remaining tracks of the program in the
same manner, and store them by briefly pressing the  button.

It is also possible to enter the track directly using the numeric buttons,
instead of using the  and  buttons. After you enter the number,
press the  button briefly to store the track, as described above.
If you store thirty tracks, the screen displays the message 'Program full'.
The playback programming process is concluded when all the desired tracks
have been stored.
 End the playback programming process by holding the  button on
the remote control handset or the SELECT knob pressed in for about one
second
The playback program can now be played.
 Start the playback process by pressing the  button
Playback starts with the first track of the playback program. The screen
displays the message 'Prog ' while a playback program is playing.
The  and  buttons select the previous or next track within the
playback program.
Briefly pressing  button in STOP mode opens the CD drawer, and
thereby erases the playback program.
A playback program can also be erased without opening the CD drawer:
 Erase the playback program.
Hold the  button pressed in again for about one second
The playback program is now erased.
43