Operating Incidents; When The Linen Comes Off The Dryer-Ironer It Is Not Dry; The Folding System Works Without Stopping - Electrolux R Series Operating Handbook

01106073 0209
Notice Date
Encountered problem
The washing remains
stuck to the cylinder
When the linen comes off
the dryer-ironer it is not
dry
The folding system
works without stopping
1
5
Page
Cause of problem
Your washing is not rinsed correctly
if the washing is insuffi ciently rinsed.
Check that ironer separating ribbons
are intact.
Check the cylinder temperature.
The washing is not suffi ciently spun.
Your linen is starched
Your washer-spin dryer has a spin
rating of below 300G.
Check the drying quality of your
washing machine.
The ironing speed is too high.
The ironing temperature is too low.
The linen that you are trying to iron is
too thick.
Check operation of the heating.
Check operation and cleanliness of
the vacuum intake system.
Check the condition of ironing bands
(fi bers containing scale).
Check the pressure of the ironing
roller on the ironing cylinder.
Check that the photoelectric cell is
opposite its refl ector.
The cell is correctly positioned
opposite its refl ector.

5. Operating incidents

OPERATING
HANDBOOK
Solution
Check rinsing with a 1 %
phenolphthalein solution diluted in
alcohol. If this colorless liquid turns to
pink on the washing as it comes out
of the washing machine, and it still
contains detergents.
Increase the number of rinsings if
necessary or reduce product doses.
There is a risk of starch deposits
forming on the cylinder
You should plan on a short pre-drying
session in a dryer (5 – 10 mins).
The residual moisture content of the
washing should be about 50 %.
Reduce the ironing speed.
Check that these are clean and clean
them if required.