Locking And Tagging Procedure - Electrolux R Series Operating Handbook

OPERATING
HANDBOOK

Locking and tagging procedure

A red insert at the beginning of this instruction handbook schematically shows the locking
and tagging procedure described below. If you wish, you can detach this insert and display it
close to the machine to remind maintenance personnel of the safety instructions.
1
2 2
3 3
4 4
4. Safety
Always respect items
2, 3 and 4 carefully
before doing any re-
pair or maintenance
work on the machine.
Put the main switch
to Off and lock the
handle with a padlock
in one of the three
holes provided for this
purpose.
Open the fi xed protec-
tors (casings, doors)
with the key provided
or a special tool.
Close and carefully
lock the fi xed protec-
tors.
01106073 0209
Notice Date
Close the stop valves for
the other supplies
(steam,gas, ther-
mal fl uid, com-
pressed air) to stop
and lock their han-
dle with a padlock.
Do the maintenance.
Unlock the stop
valves and the
main switch.
3
4
Page