Cooling Mode; Automatic Mode - Electrolux R Series Operating Handbook

OPERATING
HANDBOOK
Warm-up
MANU

Cooling mode

Warm-up
STOP RST-CNT NEXT
Cool-Down : xx°C

Automatic mode

Mx 160°C
DIAMMS
3. Method of use
NEXT
START
2.0m/mn 000
NEXT
01106073
Notice
Warm-up
As soon as the machine is turned on, the "Start
heating" command is given. The cylinder temperature
begins to rise.
By default, the machine is set for automatic mode.
The service screen appears as soon as the sheets
have been inserted or when the required temperature
is reached.
Cooling mode
When the STOP function is requested during
operation, the machine will switch to standby and the
heating system will be switched off.
The screen will remain in this mode as long as the
temperature of the cylinder remains above 100°C
(212°F).
The screen then displays the following message.
Stand by
START
You can now switch off the machine.
RST-CNT resets the sheet counter.
Selection of the automatic mode
When it starts up, the machine is set for automatic
mode by default. However, you can switch over to
manual mode at any time.
The "M" in the upper left-hand corner shows that you
are in manual mode. To return to automatic mode,
all you need to do is to press once on the "DIAMMS"
button.
The "X" behind the letter "M" can take several forms:
• "F" if you have chosen the "FIX" folding mode.
• "P", if you have chosen the "PLIVIT" folding mode.
• If nothing is shown, this means that folding is
deactivated.
0209 8
3
Date Page