Electrolux R Series Operating Handbook page 10

01106073
1741
Notice Date
RECOMMANDATIONS
AND WARNINGS
REGARDING
Ironer maintenance
Reject ratio
Plivit TM Length Folding
Buttons on Duvet covers
6
2
Page
DESCRIPTIONS
(why ant what are the consequences)
Your ironer is designed to run 8 hours without inter-
ruption. Every 8 hours and at other set intervals there
are a number of required maintenance operations to
be performed by yourself or your service engineer. It
is critical that you strictly follow these requirements
for your ironer to run properly. Please refer to chapter
"Preventive maintenance" of this manual. Should you
run your ironer for more than one shift, you must en-
sure that these maintenance operations are performed
between shifts.
In addition to these maintenance operations, your
ironer should be stopped, cooled and shut down for at
least one hour every 24 hours.
Because faltwork is only f at and rectangle the day you
buy it and then rapidly changes shape and charateristcs
after each wash, it is normal that 4% to 5% are rejected
by the machine.
Note that the quality of feeding will inf uence the
quality of folding. Items may be rejected because they
have not been fed properly. Static electricity and dirty
photocells will also interfere with the performance of
your ironer. Refer to "Preventive maintenance" chapter
of this manual.
Your ironer performs a Plivit
It is different from an edge to edge folding and from an
accordion folding. Refer to Chapter 03 page 26 for
explanation and illustrations of various folding paterns.
In order to obtain consistent sizes of folded items, sor-
ting f atwork per size before ironing is paramount.
Some duvet covers feature various types of fasteners
that can be buttons, velcro, in plastic, metal or wood
etc... These duvet covers may be ironed making sure
that fasteners are facing up on the feeding table. The
drying in the area of the fasteners will be longer than
the rest of the duvet cover. This is normal due to the
multi-layer of textile in this area and its complex
shape. Lying these layers f at on the feeding table will
help with a more homogeneous drying.
Note that if the thickness of the duvet cover plus the
buttons/fasteners is greater than 8mm, it may interfere
with the f nger guard protection of your ironer and
stop it. This f nger guard is a safety device to protect
operators getting their f ngers caught and driven into
the ironer.
Length Folding patern.
TM
OPERATING
HANDBOOK
Type of product concerned
Basic R LF FLF
X X X X
X X
X X
X X X X
F-R FFS
X X
X
X
X X