TWC6M - Six Unit Rapid Charger FOR RECHARGEABLE TWO-WAY RADIO BATTERIES Model: TWC6M User Manual...
Page 2
Power Products dealer or call customer service at rechargeable two-way radio batteries. With the appropriate charg- 800-529-1619. ing pod installed, the TWC6M can charge batteries with these cell types: nickel cadmium (NiCd), nickel-metal hydride (NiMH), lithium ion (Li-Ion), or lithium polymer (LiPo).
Page 3
3. Turn the locking screw on the bottom of the charging pod coun- 6. Connect the small end of the power supply cable to TWC6M and ter-clockwise several rotations. Lift the charging pod and the plug the other end into a wall outlet. You are now ready to charge screw from the charging base.
Page 4
TWC6M-HW Hard wire kit for in-vehicle installations. Supplies pow- Product Approval er to TWC6M from a vehicle battery or other 12V / 24V power source. Specifications subject to change without notice. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device...
Need help?
Do you have a question about the TWC6M and is the answer not in the manual?
Questions and answers