Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Endura NCC0325
Summary of Contents for Endura NCC0325
- Page 1 Single Unit Rapid Charger FOR RECHARGEABLE LMR BATTERIES Model: NCC0325...
- Page 2 Introduction Thank you for purchasing an ENDURA™ NCC0325, Single Unit Rapid Charger. This high quality product is designed for use with rechargeable LMR batteries. With the appropriate charging pod installed, it can charge batteries with: Lithium ion (Li-Ion), nickel metal hydride (NiMH), or nickel cadmium (NiCd) chemistry.
- Page 3 Do not remove the charger’s housing or make any modification to the charger. Use only the power supply provided with the ENDURA™ NCC0325 charger. If a replacement power supply is required, order part number NCC0325. Use of other power supplies may damage the charger or batteries you may be attempting to charge.
- Page 4 Do not over tighten the screw. Inspect the charging contacts to ensure they are clean and unobstructed. Connect the AC to DC power supply to the ENDURA™ NCC0325. You are now ready to charge a battery compatible with the charging pod.
- Page 5 Allow the charge status LED to go o before placing another battery in the charging pod. The ENDURA™ NCC0325 is designed to operate at room temperatures be- tween 15°C and 30°C. Charging batteries at room temperatures outside...
- Page 6 Indicates battery diagnostic has “timed out” and cannot be Times completed due to excessively low battery voltage. Charge battery with charger supplier with radio, then resume use of ENDURA™ NCC0325. Flashes 3 Indicates over-heat condition for a Li-Ion battery. Battery Times temperature is over 43°C and charging has stopped.
- Page 7 Warranty And Service During Warranty The ENDURA™ NCC0325 is made from high quality materials and designed to provide years of reliable service. The following warranty applies: Power Products Unlimited, Inc. (PPU) warrants this product to be free from defects in workmanship and materials for one-year from date of purchase by the end user.
- Page 8 ENDURA™ NCC0325 Specifications Dimensions 115 x 136 x 66 mm / 4.5 x 5.4 x 2.6 inches Weight (Charger Only) 275 g / .6 lbs. Compatible Chemistries NiCd / NiMH / Li-Ion Operating Temperature 15° C – 30° C Storage Temperature 0°...
Need help?
Do you have a question about the NCC0325 and is the answer not in the manual?
Questions and answers