Tubing and fittings used to connect
the control head to the brine tank.
Tubing is usually inside the brine
tank, the fittings are usually in a
small bag, either with the tubing,
with the instructions, or with the
control head. Fittings include the
brass brine nut, ferrule, insert, and
screen.
Brine Connection Parts
Fitting(s) that connect the control
Please Note:
head to the drain line.
Drain line is not included.
Depending on the system ordered
there are multiple options, and the
pictures shown are common
examples but actual fitting may
vary.
Drain Fitting
5 of 28