AFWFilters Fleck 5600 Installation Instruction page 14

Number
NT
of Tanks
Indicates
current
UT
tank in
service
C Capacity
H Hardness
Time Clock - will begin a regeneration
cycle at the set regeneration time after
the set number of days has passed.
Tc
Common setting on all backwashing
systems except water softeners to
ensure consistent cleaning of the media.
regeneration cycle on the set day(s) at
dAY
recommended in most situations.
For systems with only 1 media tank (all
1
systems except dual tank softeners).
For systems with 2 media tanks (dual
2
U1
Tank 2 is in service (dual tank softeners
U2
System capacity, in grains. Metered
softeners only. This will be set to match
your system size, so a 48k or 48,000
-1-999.9
grain system will be set to 48. Reference
(x1000)-
the tank size chart above for help in
matching up your tank size with
Hardness of the water, in grains.
Metered softeners only. Hardness, this is
the hardness of the water as measured
in grains per gallon (GPG). If your test
-1-199-
shows hardness as parts per million
(ppm) or milligrams per liter (mg/l)
simply divide by 17.1 to get grains per
14 of 28
Day of the Week - will begin a
the set regeneration time. More
consistent Time Clock setting is
tank softeners only).
Tank 1 is in service
only).
capacity.
gallon.